How To Set Up Garage Door Opener In Car Jeep Grand Cherokee

And Other Warning Labels In Your Vehicle.

Some vehicles may require the ignition be turned on or the vehicle actually running to program the homelink ® transceiver. Locate the homelink garage door buttons. For additional information on accessories to help personalize your vehicle, visit www.mopar.com (u.s.), www.mopar.ca (canada) or your local jeep ® brand dealer.

Find Out If You Need A Bridge.

2) push learning button on garage door opener, within 30 seconds push garage door remote button and desired homelink button in wk2 simulataneously for a few seconds (hold garage remote near wk2 homelink button while doing this) 3) repeat #2 above. Here’s how you erase those codes: For some vehicles, a compatibility bridge is needed to properly program the homelink system to our full line of products.

Press And Release The Learn Button.

Before you proceed, turn off your car, close all of the doors, and make sure that the key is removed from the ignition. Problems locating the learn button refer to your garage door opener owner’s manual. 2844814_18a_grand_cherokee_ug_eng_051017.indd 2 5/10/17 2:36 pm

Push These Buttons Together For About 10 Seconds.

1) clear codes by holding homelink buttons 1 and 3 down for a few seconds. Hold the garage door remote 1 to 3 inches away from your evic, and press the selected homelink button and the garage door remote button simultaneously. You can do this in a few easy steps.

Hit The Learn Button On The Back Of The Door Opener.

Select one of the three homelink buttons to train. How to program the garage door opener on a 2002 jeep grand cherokee. If you move, or are purchasing a used car, you’ll want to clear the previous homelink garage door opener settings before programming your own.