How To Clean Maytag Washer Filter Top Load

Here Is How You Access And Clean The Filter In Your Maytag Front.

However there is a drain pump filter, part #14 basket and tub parts diagram mentioned in the parts list, which is there to trap lint from being pumped out to the drain. Some filters are disposable, so instead of cleaning them you can just throw them away and put a new one in place. Add an affresh ® washing machine cleaner tablet to the bottom of the tub.

Many Parts Of A Maytag Washing Machine Are Easy To Work On, But In Order To Get To Almost Anything Inside A Maytag Washer You First Need To Remove The Front Cover And Then Lift Up The Top Of The Machine.

Remove the drawer by releasing the tab on each side. Afterwards, just let it sit for one. Open the two screws on both sides of the front panel using a flathead screwdriver.

Washers And Dryers Such As Those By.

I don’t think that it is designed to be removed too often though. Fortunately, maytag makes this part of the job very simple. Did you know that your washing machine has a lint filter trap that needs to be cleaned out?

Open The Washer Door Or Lid And Wipe Down The Inside Glass Or Metal With A Damp Cloth.

Remove any items left in the tub. The quickest way to clean out your filter is to remove it from the unit and soak it in hot water, loosening any clog or trapped residue. During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.

Open The Dispenser Drawer By Pulling On The Handle At The Base Of The Washer.

Then lift up the edge and wipe the interior surfaces as well. If you live in a humid area, leave the lid open after each load to allow the drum and seals to dry out and reduce the risk of mold and mildew growth. Close the door and select your washer's cleaning cycle.